Step One: Charge everything The first thing you want to do, preferably the day before you want to take your drone out, is to charge absolutely everything. Amazing new features including obstacle detection with collision avoidance. The latest Assistant 2 version for the Mavic 2 Pro And Zoom at the time of writing is v2. I have removed some characters from my password in the below image. You never know what version is on there. The Mavic will fly and behave according to the latitude, longitude and wind speed which you programmed in. For each of those two ways that I've described and after the most important thing what to do after the firmware update.
You can also find more information on along with notes and videos. There is also terrific information on the Mavic Pro Vision Positioning system. Mine would download, but not update move it onto the P4 Std. One you can choose which specific firmware version you upgrade to. So it's a good idea to at least take a look. Here we go, please follow this step by step carefully.
You only need to install the firmware at the top of the list; ignore any other entries. This section is for checking and analyzing flight data on the Mavic Pro performance and also for diagnosis. But today I will show you how to update the firmware on the Mavic 2 Why update the firmware? I don't want to use my iPhone as the screen is too small. When should you and when shouldn't you update the firmware. In this case a new version is available.
So we basically have made a backup of the Mavic Pro quadcopter to our local computer. Then your Mavic 2 will not fly until the correct firmware has been installed. Once this is done you've updated the firmware on the remote control on the drone and the battery that's in the drone. This then activates the Calibration tutorial which guides you through the process on screen, just make sure that there are no magnets or electronic equipment nearby. You can select all or choose which files you want to upload.
You have time to go through the settings and make sure that they are what you expect them to be. Once the transmission is complete the actual update starts success the drone is updated. When using Task Library to repeat a flight, make sure the takeoff altitude is the same. Make sure the map correctly shows your location and take off and do a short test flight. You'll see this confirmation of the latest version. So this can take quite a few minutes to upload. You may need to downgrade to an older version if you installed the latest firmware and it contained a bug which caused problems with your Mavic Pro quadcopter or remote controller.
Make sure that pushing the right stick to the right actually makes the drone go to the right. Or you can download it by clicking on the link below. Or maybe you've even purchased it used. And I don't face some problem with assistant 2, actually. While this is based on the older Mavic Pro, many of the troubleshooting tips can also be done on the Mavic 2 quadcopters.
On this channel we do a lot of guides and tutorials just like this one. If you are into programming, then if you want to make changes to the Mavic pro or create new applications then you should sign up and use the. All right so you don't have any critical or important flights planned. You may also see an older Mavic firmware version. Well I got it downloaded and did the vision sensor calibration, which was really all I needed to do, so I think everything is looking good at the moment.
At the end of this post, you can read the firmware releases notes, including the issues fixed and improvements. Watch these video if you still confuse with this first Step. You also need to make sure that your computer has a good internet connection, as the firmware update can take a while. There are 2 ways to upgrade the Mavic 2 quadcopter and remote controller. It is not just the Mavic 2 quadcopter and its components which the firmware upgrade fixes and improves. You can find and download the older.
You can use a smartphone, but a tablet is bigger and it's easier for you to see the drone functions, as well as where the drone is going. The Vision Positioning System now uses four sensors to increase hovering accuracy and reliability, creating a more controlled flying experience. P Position mode is the standard mode, giving access to normal flight as well as Intelligent Flight Modes, ActiveTrack and TapFly. If your receive a vision system error on your Mavic Pro, then calibration may fix the problem. When you're ready to fly, go back to the main camera mode and click on the icon shaped like a bullseye, which is third from the top on the left-hand side of the screen.